Power Injection

This is a non-controlled version of our 4 Port PoE injector. It permits injection of a voltage you supply (per port) onto a CAT5 cable for use by radios and other devices which use spare pair PoE - that is, expects power on...

 Key product features are as follows:   Designed to provide power and sync to radios which are compatible with the 56V CMM5. Provides the newer "Cambium Sync" style synchronization which can be used by the...

Dual Voltage Inputs and Jumper Settable PoE injection supports both Cambium and non-Cambium Radios.      Our PowerInjector plus Sync Product permits the powering of almost every different type of radio or...

This is a Control Board for the RackInjector. It is intended as a replacement in case one is damaged. It needs to be installed in the RackInjector case with all the cables connected in order to be functional. 10/100...

RACKINJECTOR FIRMWARE NOTE: We have a limited-release version of firmware for the RackInjector Control Board to support this product. Please email custsvc@packetflux.com if you need to install one of these boards in a...

  Gigabit Midspan Power Injection 4 Ports of Injection Separate power input for each port - allows multiple voltages to be selected. Each pair on the CAT5 cable can have its power polarity...

Our SiteMonitor products permit the monitoring and control of equipment at any site which has IP connectivity. Designed to provide low-cost SNMP and Web monitoring and control, the SiteMonitor products are the perfect...